The “Auto import product settings” page allows you to schedule import operations to automatically update product settings on a regular basis. You can set up an automatic import from external sources by creating and configuring your auto import settings.

To open the “Auto import product settings” page, go to Repricer navigation bar > Import / Export > Auto import settings.

Set up a new auto import

To set up a new auto import, follow these steps:

Step 1. Click the “Add” button with the plus icon at the top left;

Step 2. Set the auto import configurations in the “Create import template” modal form according to the following fields and requirements:

Import URL: Enter a valid web address starting with either "http://" or "https://". It is the location where you place the product import file. Note: This is a mandatory field.

Password protected: Enable this option if your import source is password-protected and enter the corresponding login and password in the additional fields. Note: These fields are mandatory if the “Password protected” checkbox is checked.

Import will run: It displays the auto import scheduled periods. To restore the default period settings, click the “Reset” button. To change the schedule settings, switch between the following tabs and adjust their settings accordingly:

• “Minutes”: to specify the minutes;
• “Hours”: to specify the hours or select “Every hour”;
• “Days”: to specify the days or select “Every day”;
• “Month”: to specify months or select “Every month”.

Advanced options: It allows you to customize the import frequency further, per each of the time-period selections. To set the advanced import frequency open the corresponding tab (“Minutes”, “Hours”, “Days”, or “Month”), click on “Advanced options”, and use the radio button to select the frequency:

• “Every” – for the import to be executed every certain minute/hour/day/month starting from the defined point;
• “Every hour/day/month between” – for the import to be executed every certain hour/month within the selected time period or every certain day starting from the defined day of the month.

Step 3. Once all the necessary information has been added and configured, click the “Save” button to finalize the automatic import configuration. This will create a new auto import schedule and enable the system to automatically import product settings according to the specified settings.

The results of the executed auto import operation can be viewed in the table of the “Import product settings” page. For more information, see Repricer | Import product settings.

Manage your auto import settings

The “Auto import product settings” page displays all your auto import settings. In order to update the auto import settings, click the settings icon within the corresponding auto import panel and make all necessary changes in the “Update import template” modal form that appears. The fields present in this form are identical to the abovementioned fields of the "Create import template" form.

Each auto import panel shown on the page provides the following options and information:

Enabled/Disabled: It indicates if the auto import is active and performs imports according to the specified settings or not. Switch the toggle to activate or deactivate the auto import.

Password protection: It indicates whether the import file is password protected or not.

Import will run: It displays the scheduled frequency at which the import is executed.

Import URL: It displays the web address from where the import file is retrieved with an option to copy to the clipboard.

If you wish to remove the unnecessary auto import, select the “Delete” button with the trash bin icon within the relevant auto import panel and confirm your action.